2010-07-20 07:32 roboos
* ft_filetype.m: speed up the detection of Matlab files by looking at initial MATLAB string
in file
moved spmeeg_mat detection into subfunction
2010-07-19 02:21 josdie
* ft_read_event.m: fixed typo in just submitted egi_sbin code. Oops.
2010-07-18 04:38 josdie
* ft_read_event.m: egi_sbin (EGI simple binary format) only dubs an event a "trial" type if
its duration is the same as the segment.
Also, only adds "trial" type events based on segHdr if it doesn't already have a "trial"
type even for every segment.
2010-07-15 10:46 vlalit
* private/fif2grad.m, private/mne2grad.m: Change the sign of planar gradient as it was
discovered by Laurence that the sign is wrong.
2010-07-14 09:55 roboos
* private/read_vtk.m, private/write_vtk.m: moved from CVS repository to SVN repository
2010-07-13 18:35 vlalit
* ft_read_event.m: Moved reading the header to individual cases as agreed with Robert
2010-07-13 14:02 vlalit
* ft_read_event.m, private/read_spmeeg_event.m: Bug fixes
2010-07-12 20:11 roboos
* ft_read_event.m: removed the creation of trial-events in case hdr.nTrials>1 for some
specific formats, and added it at the end of the code so that it is done for all formats
with multiple trials
2010-07-12 13:18 vlalit
* ft_read_header.m: set nSamplesPre to 0 for continuous data converted with MNE toolbox (as
agreed with Laurence)
2010-07-10 09:12 roboos
* private/tokenize.m: added persistent variable for caching input/output when repeated calls
have same input args
2010-07-09 11:16 jansch
* ft_read_header.m: fixed bug in dealing with ctf balancing coefficients (introduced by me
earlier)
2010-07-09 06:59 jansch
* ft_read_header.m: inserted workaround to avoid trying to read ctf balancing coefficients
if these are not present in the data. results in significant speed up
2010-07-07 15:25 stekla
* private/buffer.mexa64, private/buffer.mexglx: Recompiled MEX file for 32- and 64-bit Linux
(Matlab75), added support for writing CTF_RES4 chunk.
2010-07-07 15:20 stekla
* ft_read_header.m, ft_write_data.m, private/buffer.mexw32: Added writing of CTF_RES4 chunk
to FieldTrip buffer if present as hdr.ctf_res4 (uint8), added decoding of attached
CTF_RES4 chunk in ft_read_header, recompiled MEX file for Windows (MinGW).
2010-07-06 09:50 stekla
* private/buffer.mexa64, private/buffer.mexglx, private/buffer.mexw32: Recompiled buffer MEX
file on Windows (MinGW) and Linux (32+64 bit, Matlab75) with added support for checking
closed connections.
2010-07-06 09:04 roboos
* private/loadcnt.m, private/read_ctf_ascii.m, private/read_ctf_mri4.m: use explicit warning
state when switching warning off and ensure that it is reverted to the original state
2010-07-06 08:36 roboos
* private/read_asa_elc.m: updated code to make compatible with more recent elc files
also read Positions2D from file, ensure that labels are column vector
see http://bugzilla.fcdonders.nl/show_bug.cgi?id=87
2010-07-05 06:59 roboos
* private/write_brainvision_eeg.m: explicitely use \r\n for line endings in the *.vhdr ascii
header file
2010-07-01 15:54 roboos
* ft_read_header.m: give channels a unique label in case that the dataset contains channels
with the same label (e.g. chan-1, chan-2)
otherwise ft_channelselection fails (because of a more stringent check)
2010-06-30 19:49 roboos
* private: added headcoordinates (again) as file-external
2010-06-30 19:47 roboos
* private/headcoordinates.m: deleted headcoordinates as real file
2010-06-30 19:42 roboos
* private: deleted file-external for headcoordinates
2010-06-29 14:38 roboos
* ft_read_event.m, ft_write_event.m: changed the reading and writing of events in the
m-files to reflect the updated mex files (thanks to Stefan)
the mex files now convert the structure to a serialized network-ready stream and write
them, previously the conversion was done in the m-file
2010-06-29 14:31 roboos
* private/buffer.mexa64, private/buffer.mexglx, private/buffer.mexmaci,
private/buffer.mexw32: recompiled on windows (thanks to Stefan) and on OSX (with
matlab76/2008a on MacBook Pro)
2010-06-29 14:24 roboos
* ft_read_event.m: only detect triggers from trigger channels in itab/chieti MEG data in
case the eventtable (from the *.mhd) is empty
2010-06-29 14:22 roboos
* private/itab2grad.m: improved implementation of itab2grad, now not only works for
magnetometers, but also gradiometers (tested on the 28-channel Rome system)
2010-06-29 14:20 roboos
* ft_chantype.m: added chieti/itab based on original header details
changed some whitespace (esp. for the yokogawa section)
2010-06-29 14:19 roboos
* ft_read_headshape.m: only convert labels into column if labels are present
removed whitespace
2010-06-29 14:17 roboos
* ft_filetype.m: added some chieti/itab formats
2010-06-22 15:09 roboos
* ft_filetype.m, ft_read_data.m, ft_read_event.m, ft_read_header.m, private/itab2grad.m,
private/read_itab_mhd.m: added native matlab implementation for reading ITAB MEG data
(used to be win32 dll mex file)
added itab153 for planar computations and type detection
replaced chieti153 by itab153
2010-06-17 09:35 tilsan
* private/yokogawa2grad.m: fixed bug in relation to magnetometers and grad structure:
magnetometer index has to be relative to overall grad
index.
2010-06-17 08:12 tilsan
* private/yokogawa2grad.m: support added for reference channels in grad-structure
2010-06-16 16:03 roboos
* private/filetype_check_extension.m, private/filetype_check_header.m,
private/filetype_check_uri.m: added persistent variable to speed up subsequent checks on
the same input arguments
2010-06-16 13:54 stekla
* private/sap2matlab.m, private/sap2matlab.mexw32: Added sap2matlab.m for documentation and
auto-compilation of MEX-file.
2010-06-15 14:09 roboos
* private/yokogawa2vol.m: moved yokogawa2vol from fieldtrip/private to fileio/private
2010-06-14 14:33 roboos
* private/read_edf.m: added support for reading EGI files that ave been converted to EDF+
these files have an annotation channel as last one with a deviant sampling frequency
only channels with a consistent sampling frequency will be read by read_header and
read_data
2010-06-14 09:14 stekla
* private/sap2matlab.mexw32: Recompiled sap2matlab MEX file on Windows (MinGW).
2010-06-14 09:11 stekla
* private/decode_nifti1.m, private/encode_nifti1.m, private/sap2matlab.mexa64,
private/sap2matlab.mexglx: Added sap2matlab MEX files (compiled using Matlab R2007b on
mentat069/213) and NIFTI-1 encoding function.
2010-05-28 13:51 vlalit
* ft_read_headshape.m, private/yokogawa2grad.m: Fixing some problems and simplifying the
Yokogawa code
2010-05-28 09:06 tilsan
* ft_read_headshape.m: changed support for Yokogawa marker file reading
2010-05-26 13:01 tilsan
* private/yokogawa2grad.m: added support for magnetometers
2010-05-22 21:11 vlalit
* ft_read_event.m: One more fix to brainvision handling
2010-05-22 20:47 vlalit
* ft_filetype.m: Fix of a problem created by the previous fix which did not distinguish
between brainvision_eeg and brainvision_dat (thanks to Marco Rotonda)
2010-05-20 12:13 roboos
* private/read_zebris.m: added missing function
2010-05-20 08:51 tilsan
* private/yokogawa2grad.m: major update to this function:
- checks for proper Yokogawa toolbox
- uses new indexing for gradiometer parameters due to new toolbox
- bug removed to account for discontinuous channels lists, important
if channels have been marked as bad in the recording software
- exports the correct labels for mixed axial/planar gradiometer systems
- transforms the gradiometers to headcoordinates if a marker file is
found
2010-05-20 08:46 tilsan
* ft_read_headshape.m: reads fiducials from Yokogawa marker files and matching information,
if present
2010-05-20 08:38 tilsan
* ft_read_header.m: recognizes Yokogawa marker file type
2010-05-20 08:37 tilsan
* ft_filetype.m: recognizes Yokogawa marker file type
2010-05-20 08:36 tilsan
* private/read_yokogawa_event.m: checks for proper Yokogawa toolbox
2010-05-20 08:35 tilsan
* private/read_yokogawa_data.m: checks for proper Yokogawa toolbox, calculates ad_range from
AD bit
resolution
2010-05-20 08:33 tilsan
* private/read_yokogawa_header.m: checks for proper Yokogawa toolbox, reads AD bit
resolution
2010-05-20 08:25 tilsan
* private/headcoordinates.m: headcoordinates is needed by yokogawa2grad
Diese und die folgenden Zeilen werden ignoriert --
A headcoordinates.m
2010-05-20 07:43 jansch
* ft_read_mri.m: changed conditional statement to allow for correct handling of .mnc files
2010-05-19 15:55 roboos
* ft_chantype.m: small change in help, nothing functional
2010-05-18 13:32 stekla
* private/buffer.mexa64, private/buffer.mexglx: Compiled buffer MEX file (includes support
for automatic endian conversion) on Mentat069 + Mentat213 (32/64 bit Linux), using R2007b.
2010-05-18 13:27 stekla
* private/buffer.mexw32: Recompiled buffer.mexw32, fixes for handling chunks + endian
conversion.
2010-05-17 20:23 roboos
* ft_filetype.m, ft_read_data.m, ft_read_event.m, ft_read_header.m: Added file type
detection for gdf, if biosig is supported it will be used for reading the header and data.
Reading events using biosig is not yet supported, because it is not clear yet how
sopen+sread represent the events in a file format independent manner.
2010-05-17 10:43 roboos
* ft_read_data.m: fixed bug (again) in caching when the channel labels have changed (i.e.
when other data is being cached), thanks to Philip
2010-05-13 11:01 vlalit
* ft_filetype.m, ft_read_event.m: This should complete the fix for recognizing of any of the
3 files in a brainvision dataset, in particular for reading events.
2010-05-13 10:50 vlalit
* ft_read_header.m: Bug fix from Laurence Hunt
2010-05-12 16:19 marlal
* private/read_ctf_mri.m, private/read_ctf_mri4.m: Fixed "one voxel off" bug when flipping
data along x. Use header image size instead of hardcoded 256. Flip along x (left-right) is
"isolated" and can easily be turned off while maintaining consistency between data,
transform matrix and fiducials, probably should be if no other code depends on it.
In read_ctf_mri only: Added reading in latin1 encoding, some files need it (perhaps system
dependent). Now verifies clipping range (in header) and reads data as int16 instead of
uint16 if appropriate (think this is always the case for 16 bit data).
2010-05-12 15:26 marlal
* ft_read_mri.m, private/read_ctf_svl.m: Added reading of CTF SAM image (.svl) files.
2010-05-09 11:32 roboos
* ft_chantype.m, ft_read_headshape.m, ft_read_sens.m, private,
private/read_yokogawa_header.m, private/yokogawa2grad.m: added ft_ prefix to all externals
originating from fieldtrip/forward
changed some functions to reflect the new prefixed helper functions
2010-05-09 11:21 roboos
* private/bti2grad.m, private/ctf2grad.m: updated some main and private functions to reflect
the name change of apply_montage to ft_apply_montage
2010-05-09 11:15 roboos
* private: renamed apply_montage to ft_apply_montage, updated external in fileio/private
2010-05-07 12:00 stekla
* private/buffer.mexa64, private/buffer.mexglx: Compile buffer MEX file (includes support
for some of the new 'chunks' and WAIT_DAT) on Mentat069 + Mentat213 (32/64 bit Linux),
using R2007b.
2010-05-07 10:54 stekla
* ft_poll_buffer.m, private/buffer.mexw32: Added ft_poll_buffer for quickly getting sample
and event numbers, and optionally waiting for a given amount of milliseconds. Also
compiled buffer mex file accordingly (Windows / MinGW)
2010-05-07 07:22 roboos
* private/read_ctf_mri.m: added some comments to clarify the 202 or 204 byte padding issue
explicitely read uint8 and typecast to char
2010-05-06 10:09 roboos
* ft_filetype.m: use full filename (MarkerFile.mrk) for ctf_mrk to avoid confusion with
yokogawa
2010-05-04 15:51 stekla
* private: Added external for fetch_data (in fileio/private), small fix in fMRI demo
clients.
2010-05-04 13:58 stekla
* ft_write_data.m, private/buffer.mexw32: Added initial support for writing meta data to the
FieldTrip buffer from Matlab, updated rt_frmiproxy to reflect these changes.
2010-05-04 12:23 stekla
* ft_read_header.m, private/buffer.mexw32, private/decode_nifti1.m,
private/sap2matlab.mexw32: Moved functions for decoding NIFTI-1 header and parsing Siemens
protocol data into fileio/private. Compiled updated buffer.mexw32 using MinGW. Modified
rt_fmriviewer to use the updated header structure.
2010-05-03 12:31 stekla
* @uint64/abs.mexw64, @uint64/max.mexw64, @uint64/min.mexw64, @uint64/minus.mexw64,
@uint64/plus.mexw64, @uint64/rdivide.mexw64, @uint64/times.mexw64, ft_write_data.m,
private/mxDeserialize.mexw64, private/mxSerialize.mexw64, private/read_16bit.mexw64,
private/read_24bit.mexw64: Added .mexw64 files as provided by Guillaume Flandin, added
"blob" element to header in ft_write_data for the rt_fmriproxy -- this will be changed
again once properly formatted header information is contained in Fieldtrip buffer.
2010-04-29 23:41 marlal
* ft_read_header.m, private/ctf2grad.m: Added reading of 'G3AR' adaptive balancing
coefficients. No warning from ft_read_header.m since these may not be commonly used.
getCTFBalanceCoefs.m notifies when they aren't found though.
2010-04-29 14:43 roboos
* ft_read_event.m: documented the dataformat and headerformat options
2010-04-28 14:21 stekla
* private/buffer.mexw32.pdb: Deleted debug information (.pdb) file for buffer. This is too
system-specific, and if people want to start debugging C code, they should be able to
compile the MEX file themselves anyway.
2010-04-28 14:14 stekla
* private: Modified externals (convert... & estimate_units) again - this time include ft_
prefix.
2010-04-28 14:09 stekla
* private: Modified externals (convert_units + estimate_units): now point at ../../forward,
where the original files have been moved to by Robert.
2010-04-28 12:18 roevdmei
* private/read_neuralynx_ds.m: added ft_ prefix to filetype calls
2010-04-23 08:31 roboos
* private/read_yokogawa_event.m: re-added the varargin argument and fixed a bug in the
naming of a variable
2010-04-23 03:23 josdie
* private/read_sbin_data.m: Fixed begsample/endsample option for unsegmented files where the
precision is single or double.
2010-04-22 15:21 vlalit
* private/read_trigger.m: Fixes for problems that popped up immediately after re-integrating
Fieldtrip and SPM8
2010-04-22 07:11 jansch
* ft_read_mri.m: fixed bug for fiff-mri using mne toolbox reported by Jan Hirschmann (long
ago)
2010-04-21 17:41 roboos
* private/ama2vol.m, private/appendevent.m, private/bigendian.m, private/bti2grad.m,
private/cstructdecode.m, private/ctf2grad.m, private/fif2grad.m,
private/filetype_check_extension.m, private/filetype_check_header.m,
private/filetype_check_uri.m, private/itab2grad.m, private/littleendian.m,
private/loadama.m, private/mne2grad.m, private/mxDeserialize.m, private/mxSerialize.m,
private/neuralynx_crc.m, private/neuralynx_getheader.m, private/neuralynx_numrecords.m,
private/neuralynx_timestamp.m, private/read_16bit.m, private/read_24bit.m,
private/read_4d_hdr.m, private/read_asa.m, private/read_asa_bnd.m, private/read_asa_dip.m,
private/read_asa_elc.m, private/read_asa_mri.m, private/read_asa_msr.m,
private/read_asa_vol.m, private/read_besa_avr.m, private/read_besa_mul.m,
private/read_besa_pdg.m, private/read_besa_src.m, private/read_besa_swf.m,
private/read_besa_tfc.m, private/read_bham.m, private/read_biff.m,
private/read_biosemi_bdf.m, private/read_biosig_data.m, private/read_biosig_header.m,
private/read_brainvision_eeg.m, private/read_brainvision_marker.m,
private/read_brainvision_pos.m, private/read_brainvision_vhdr.m,
private/read_brainvision_vmrk.m, private/read_bti_ascii.m, private/read_bti_hs.m,
private/read_bti_m4d.m, private/read_bv_srf.m, private/read_ced_son.m,
private/read_combined_ds.m, private/read_ctf_ascii.m, private/read_ctf_cls.m,
private/read_ctf_coef.m, private/read_ctf_dat.m, private/read_ctf_hc.m,
private/read_ctf_hdm.m, private/read_ctf_meg4.m, private/read_ctf_mri.m,
private/read_ctf_mri4.m, private/read_ctf_res4.m, private/read_ctf_sens.m,
private/read_ctf_shape.m, private/read_ctf_shm.m, private/read_ctf_trigger.m,
private/read_curry.m, private/read_edf.m, private/read_eeglabdata.m,
private/read_eeglabevent.m, private/read_eeglabheader.m, private/read_egis_data.m,
private/read_egis_header.m, private/read_elec.m, private/read_eyelink_asc.m,
private/read_fcdc_trl.m, private/read_labview_dtlg.m, private/read_lay.m,
private/read_mat.m, private/read_mpi_dap.m, private/read_mpi_ds.m,
private/read_neuralynx_bin.m, private/read_neuralynx_cds.m, private/read_neuralynx_dma.m,
private/read_neuralynx_ds.m, private/read_neuralynx_ncs.m, private/read_neuralynx_nev.m,
private/read_neuralynx_nse.m, private/read_neuralynx_nst.m, private/read_neuralynx_nts.m,
private/read_neuralynx_ntt.m, private/read_neuralynx_sdma.m, private/read_neuralynx_tsh.m,
private/read_neuralynx_tsl.m, private/read_neuralynx_ttl.m, private/read_neuroshare.m,
private/read_nex_data.m, private/read_nex_event.m, private/read_nex_header.m,
private/read_nexstim_event.m, private/read_nexstim_nxe.m, private/read_nimh_cortex.m,
private/read_nmc_archive_k_data.m, private/read_nmc_archive_k_event.m,
private/read_nmc_archive_k_hdr.m, private/read_ns_avg.m, private/read_ns_eeg.m,
private/read_ns_hdr.m, private/read_off.m, private/read_plexon_ddt.m,
private/read_plexon_ds.m, private/read_plexon_nex.m, private/read_plexon_plx.m,
private/read_polhemus_fil.m, private/read_sbin_data.m, private/read_sbin_events.m,
private/read_sbin_header.m, private/read_serial_event.m, private/read_shm_data.m,
private/read_shm_event.m, private/read_shm_header.m, private/read_spike6mat_data.m,
private/read_spmeeg_data.m, private/read_stl.m, private/read_tdt_tsq.m,
private/read_trigger.m, private/read_yokogawa_data.m, private/read_yokogawa_event.m,
private/read_yokogawa_header.m, private/timestamp_neuralynx.m, private/timestamp_plexon.m,
private/tokenize.m, private/warp_apply.m, private/write_brainvision_eeg.m,
private/write_ctf_shm.m, private/write_neuralynx_ncs.m, private/write_neuralynx_nts.m,
private/write_plexon_nex.m, private/write_serial_event.m, private/write_stl.m,
private/yokogawa2grad.m: added full GPL copyright statement and svn ID tag for
fileio/private functions
cleaned up comments and help in some functions
no functional change
2010-04-21 16:08 roboos
* ft_create_buffer.m, ft_destroy_buffer.m, ft_filetype.m, ft_filter_event.m,
ft_flush_data.m, ft_flush_event.m, ft_flush_header.m, ft_read_data.m, ft_read_event.m,
ft_read_header.m, ft_read_headshape.m, ft_read_mri.m, ft_read_sens.m, ft_read_spike.m,
ft_read_vol.m, ft_write_data.m, ft_write_event.m: added full copyrights and svn ID tag
2010-04-21 16:01 roboos
* ft_chantype.m: added full copyright statement and svn ID tag
2010-04-21 12:39 roboos
* ft_read_event.m, ft_read_header.m, private/read_eyelink_asc.m, private/read_trigger.m:
some improvements for the eyelink_asc format
2010-04-20 11:32 roboos
* ft_read_header.m: corrected the number of timestamps per sample for eyelink (should be 2
instead of 1)
2010-04-20 11:23 roboos
* ft_read_event.m: fixed bug: make sure that header is present when reading eyelink input
events
2010-04-20 11:15 roboos
* ft_filetype.m, ft_read_data.m, ft_read_event.m, ft_read_header.m,
private/read_eyelink_asc.m: added support for eyelink_asc, using caching in hdr.orig to
speed it up
some changes in whitespace in other sections of the code
2010-04-19 15:05 jansch
* ft_read_data.m, ft_write_data.m: added support for fcdc_matbin with the data
representation being single precision. the header contains a field cfg.precision
2010-04-16 13:28 timeng
* ft_read_headshape.m, ft_read_sens.m: ft_ prefix adapted in code. In particular inverse and
fileio modules are now independentof compat
2010-04-16 08:20 timeng
* ft_write_data.m: ft_ prefixes adapted in code for functionality without compat.
2010-04-14 15:28 stekla
* private/buffer.mexw32: Recompiled buffer.mexw32 using MinGW compiler instead of Visual
Studio due to problems with dependencies on too recent runtimes (MSVCRT90).
2010-04-14 15:24 vlalit
* ft_read_vol.m: Changes to enable re-integration of Fieldtrip and SPM8. Mostly changes in
prefixes that have not been done before.
2010-04-09 13:47 timeng
* ft_write_event.m: ft prefix added to help sections and in the codes only for functions
called within the preproc and forward module. Compat now still necessary called from main
FieldTrip functions
2010-04-08 15:44 timeng
* ft_chantype.m, ft_create_buffer.m, ft_destroy_buffer.m, ft_filetype.m, ft_filter_event.m,
ft_flush_data.m, ft_flush_event.m, ft_flush_header.m, ft_read_data.m, ft_read_event.m,
ft_read_header.m, ft_read_headshape.m, ft_read_mri.m, ft_read_sens.m, ft_read_spike.m,
ft_read_vol.m, ft_write_data.m, ft_write_event.m: ft prefix added to help sections and in
the codes only for functions called within the fileio module.
2010-04-08 11:50 roboos
* @uint64: moved uint64 object into fileio directory
2010-04-08 11:44 roboos
* @uint64: removed symbolic link
2010-04-08 11:03 roboos
* compat/chantype.m, compat/create_buffer.m, compat/destroy_buffer.m, compat/filetype.m,
compat/filter_event.m, compat/flush_data.m, compat/flush_event.m, compat/flush_header.m,
compat/read_data.m, compat/read_event.m, compat/read_header.m, compat/read_headshape.m,
compat/read_mri.m, compat/read_sens.m, compat/read_spike.m, compat/read_vol.m,
compat/write_data.m, compat/write_event.m, ft_chantype.m, ft_filetype.m,
ft_filter_event.m, ft_flush_data.m, ft_flush_event.m, ft_flush_header.m, ft_read_data.m,
ft_read_event.m, ft_read_header.m, ft_read_headshape.m, ft_read_mri.m, ft_read_sens.m,
ft_read_spike.m, ft_read_vol.m, ft_write_data.m, ft_write_event.m, private/ama2vol.m,
private/appendevent.m, private/avw_hdr_make.m, private/avw_hdr_read.m,
private/avw_hdr_write.m, private/avw_img_read.m, private/avw_img_write.m,
private/bigendian.m, private/bti2grad.m, private/cstructdecode.m, private/ctf2grad.m,
private/fif2grad.m, private/filetype_check_extension.m, private/filetype_check_header.m,
private/filetype_check_uri.m, private/littleendian.m, private/loadama.m,
private/mne2grad.m, private/mxDeserialize.m, private/mxSerialize.m,
private/neuralynx_crc.m, private/neuralynx_getheader.m, private/neuralynx_numrecords.m,
private/neuralynx_timestamp.m, private/np_read_splitted_fileinfo.m, private/np_readdata.m,
private/np_readfileinfo.m, private/np_readmarker.m, private/openbdf.m,
private/read_24bit.m, private/read_4d_hdr.m, private/read_asa.m, private/read_asa_bnd.m,
private/read_asa_dip.m, private/read_asa_elc.m, private/read_asa_mri.m,
private/read_asa_msr.m, private/read_asa_vol.m, private/read_besa_avr.m,
private/read_besa_mul.m, private/read_besa_pdg.m, private/read_besa_src.m,
private/read_besa_swf.m, private/read_besa_tfc.m, private/read_bham.m,
private/read_biff.m, private/read_biosemi_bdf.m, private/read_biosig_data.m,
private/read_biosig_header.m, private/read_brainvision_eeg.m,
private/read_brainvision_marker.m, private/read_brainvision_pos.m,
private/read_brainvision_vhdr.m, private/read_brainvision_vmrk.m,
private/read_bti_ascii.m, private/read_bti_hs.m, private/read_bti_m4d.m,
private/read_bv_srf.m, private/read_ced_son.m, private/read_combined_ds.m,
private/read_ctf_ascii.m, private/read_ctf_cls.m, private/read_ctf_coef.m,
private/read_ctf_dat.m, private/read_ctf_hc.m, private/read_ctf_hdm.m,
private/read_ctf_meg4.m, private/read_ctf_mri.m, private/read_ctf_mri4.m,
private/read_ctf_res4.m, private/read_ctf_sens.m, private/read_ctf_shape.m,
private/read_ctf_shm.m, private/read_ctf_trigger.m, private/read_curry.m,
private/read_edf.m, private/read_eeglabdata.m, private/read_eeglabevent.m,
private/read_eeglabheader.m, private/read_egis_data.m, private/read_egis_header.m,
private/read_elec.m, private/read_fcdc_trl.m, private/read_labview_dtlg.m,
private/read_lay.m, private/read_mat.m, private/read_micromed_trc.m,
private/read_mpi_dap.m, private/read_mpi_ds.m, private/read_neuralynx_bin.m,
private/read_neuralynx_cds.m, private/read_neuralynx_dma.m, private/read_neuralynx_ds.m,
private/read_neuralynx_ncs.m, private/read_neuralynx_nev.m, private/read_neuralynx_nse.m,
private/read_neuralynx_nst.m, private/read_neuralynx_nts.m, private/read_neuralynx_ntt.m,
private/read_neuralynx_sdma.m, private/read_neuralynx_tsh.m, private/read_neuralynx_tsl.m,
private/read_neuralynx_ttl.m, private/read_neuroshare.m, private/read_nex_data.m,
private/read_nex_event.m, private/read_nex_header.m, private/read_nexstim_event.m,
private/read_nexstim_nxe.m, private/read_nimh_cortex.m, private/read_nmc_archive_k_data.m,
private/read_nmc_archive_k_event.m, private/read_nmc_archive_k_hdr.m,
private/read_ns_avg.m, private/read_ns_eeg.m, private/read_ns_hdr.m, private/read_off.m,
private/read_plexon_ddt.m, private/read_plexon_ds.m, private/read_plexon_nex.m,
private/read_plexon_plx.m, private/read_polhemus_fil.m, private/read_sbin_data.m,
private/read_sbin_events.m, private/read_sbin_header.m, private/read_shm_data.m,
private/read_shm_event.m, private/read_shm_header.m, private/read_spike6mat_data.m,
private/read_spike6mat_header.m, private/read_spmeeg_data.m, private/read_spmeeg_event.m,
private/read_spmeeg_header.m, private/read_trigger.m, private/read_yokogawa_data.m,
private/read_yokogawa_event.m, private/read_yokogawa_header.m, private/readbdf.m,
private/readmarkerfile.m, private/timestamp_neuralynx.m, private/timestamp_plexon.m,
private/tokenize.m, private/warp_apply.m, private/write_brainvision_eeg.m,
private/write_ctf_shm.m, private/write_neuralynx_ncs.m, private/write_neuralynx_nts.m,
private/write_plexon_nex.m, private/yokogawa2grad.m: removed the unix executable flag from
all *.m files (thanks to Guillaume)
see http://fieldtrip.fcdonders.nl/development/svn#keeping_the_svn_repository_tidy for
details
Back to top
navigation
navigation
search
